Products‎ > ‎

FOOD PROCESSING

Food Proccessing Application


PRODUCTS OF DISTINCTION DESIGNED AND MANUFACTURED SPECIFICALLY FOR THE FOOD INDUSTRY PROCESSES.

EUROLIFT BH

Electric belt hoists for loads of 500 to 5,000 kg

The EUROLIFT BH electric belt hoist meets your needs for hoisting power with the strictest levels of cleanliness. The EUROLIFT BH is a hoist complying with EC European standards, offering you the lifting power and robustness of a product designed for industrial duty combined with 100% clean operation to meet your most stringent requirements with regard to hygiene, handling of foodstuffs and chemical products and “white room” conditions.

  • Anticorrosion product with high strength rot-proof belt
  • Exceptionally little loss of headroom, enabling the EUROLIFT BH to adapt to all your installation configurations
  • Lift motor with two mechanically variable speeds and two speed travel movement motor (complying with standard EC 34.1/IEC 34.2, IP 55 protection and insulation F) combined with perfectly sealed reduction gearing enabling your loads to be shifted silently with great precision
  • A high security belt guide, electric hoisting limit switch and electrical load limiter as standard equipment, ensuring you, as user, maximum safety in every situation
  • Variable speed travel motor for precise positioning of loads

 

 


 

 

 

 

 

 

 

Brochure


EUROCHAIN VR® INOX


Electric chain hoist for loads from
63 to 1,250 kg.

Link to Verlinde web site> Stainless steel lifting chain.

> New lifting nut concept with intermediate  teeth for perfect chain drive.

> Torque limiter.

> Disk lifting brake.

> 3 m standard lifting height.

> Dual-speed lifting.

> Safety electric end of run for up and down position.

> IP55 lifting and travelling motor.

> Thermal protection on lifting motor.

> Tropic-proof protection (lifting and steering – 90 to 95 %).

> Disconnectable command cable.

> 2-buttons unit on fixed hoist or push steering carriage.

> 4-buttons unit on hoist coupled to electric steering carriage.

> Emergency stop button.

> 400V/3Ph/50Hz or 415V/3Ph/50 Hz or 460V/3 Ph/60 Hz power supply.

> Stainless steel lifting hook.

> Biodegradable oil NSF H1 (lifting and travelling  gearbox, lifting chain). 

Lubricant clean and bubble  for chains, sprockets and guides  in the food industry. 

Oil synthetic  anti-wear under extreme pressure,

Usable for incidental contact with  foodstuffs following the FDA  requirements.

> Stainless steel load wheel on hoist trolley   and accessory white finish  Paint.

>Standard   IP66 protection.

> Level of protection option increased : ATEX Zone 1, EEx. OR  ATEX Zone 22.

> Variable speed lifting.

> Extreme operating Temperatures: (-40 °C to +70 °C).

> Wall control panel instead of the pendant.

> Remote radio control.

> Manual or electric trolley. 

 

 

 

DOWNLOAD

 


MONORAILS AND FESTOONS FOR FOOD PROCESSING

C-Track monorails in Galvanising or Stainless steel. For use in Meat processing plants such as Buther shops, Slaughterhouses etc.

A wide range of applications and rail systems to give full floor coverage.

Systems for loads from 5 to 1600 kgs.The manual operation of these systems can also be combined with an electric lifting-lowering hoist while there is also the possibility of electrification with the use of a chain linking the trolleys.

All “NIKO” components are produced to a very high standard of manufacture and are suitably zinc plated or stainless steel for both indoor and outdoor applications.

The systems are of robust construction and require less or no maintenance. Two months after installation we recommend the checking of all the bolted joints and every 12 months there after.










































Comments